[Amps] Considering an Alpha 76PA, Gary Smith, 2007/10/31

• Re: [Amps] Considering an Alpha 76PA, Roger, 2007/10/31
  • Re: [Amps] Considering an Alpha 76PA, jeremy-ca, 2007/10/31
    • Re: [Amps] Considering an Alpha 76PA, Mike, K6BR, 2007/10/31
    • Re: [Amps] Considering an Alpha 76PA, jeremy-ca, 2007/10/31
    • Re: [Amps] Considering an Alpha 76PA, Gary Smith, 2007/10/31
    • Re: [Amps] Considering an Alpha 76PA, jeremy-ca, 2007/10/31
    • Re: [Amps] Considering an Alpha 76PA, Van K7VS, 2007/10/31

[Amps] Output Coupling Capacitors: Failure Mode?, EP Swynar, 2007/10/31

• Re: [Amps] Output Coupling Capacitors: Failure Mode?, EP Swynar, 2007/10/31
• Re: [Amps] Output Coupling Capacitors: Failure Mode?, jeremy-ca, 2007/10/31
• Re: [Amps] Output Coupling Capacitors: Failure Mode?, Fern Rivard, 2007/10/31

[Amps] LK 500 ZA Plate Choke, dave arruzza, 2007/10/30

• Re: [Amps] LK 500 ZA Plate Choke, jeremy-ca, 2007/10/31

[Amps] tuner anomalies, Dan Sawyer, 2007/10/30

• Re: [Amps] tuner anomalies, Vic K2VCO, 2007/10/30
  • Re: [Amps] tuner anomalies, Dan Sawyer, 2007/10/30
    • Re: [Amps] tuner anomalies, Vic K2VCO, 2007/10/30
  • Re: [Amps] tuner anomalies, Ian White GM3SEK, 2007/10/31

[Amps] Ameritron AL-1200, n9bx, 2007/10/30

• Re: [Amps] Ameritron AL-1200, jeremy-ca, 2007/10/30
  • [Amps] Tube life, Andy Pfeiffer, 2007/10/31
• Re: [Amps] Ameritron AL-1200, Tony Brock-Fisher, 2007/10/30
• Re: [Amps] Ameritron AL-1200, TexasRF, 2007/10/30
  • Re: [Amps] Ameritron AL-1200, jeremy-ca, 2007/10/30

[Amps] Switch, Dennis Watkins, 2007/10/29

• Re: [Amps] Switch, Bob Sullivan, 2007/10/30

[Amps] Thoughts after a weekend with my SB-200 during CQWW SSB, W5CPT, 2007/10/29

• Re: [Amps] Thoughts after a weekend with my SB-200 during CQWW SSB, jeremy-ca, 2007/10/30
• Re: [Amps] Thoughts after a weekend with my SB-200 during CQWW SSB, Gudguyham, 2007/10/30

[Amps] EF Johnson Roller Inductor, Bob Maser, 2007/10/29

• Re: [Amps] EF Johnson Roller Inductor, rgroh, 2007/10/29
  • Re: [Amps] EF Johnson Roller Inductor, Bob Maser, 2007/10/29

[Amps] Fil transformer, r2robby, 2007/10/29

• Re: [Amps] Fil transformer, jeremy-ca, 2007/10/29

Re: [Amps] al 80B Need good tuning procedure., Dave Weiss, 2007/10/29

• Re: [Amps] al 80B Need good tuning procedure., Gary Patterson, 2007/10/29
  • Re: [Amps] al 80B Need good tuning procedure., Bob Maser, 2007/10/29
• Re: [Amps] al 80B Need good tuning procedure., Gudguyham, 2007/10/29
  • Re: [Amps] al 80B Need good tuning procedure., Dave Weiss, 2007/10/29

[Amps] LK550-ZC, Hugh Phillips - K7XM, 2007/10/28

• Re: [Amps] LK550-ZC, Gudguyham, 2007/10/28
  • Re: [Amps] LK550-ZC, jeremy-ca, 2007/10/29

[Amps] SGC SG-1000 InterContinental; Tech info needed!, Robert Kasca, 2007/10/28

• Re: [Amps] SGC SG-1000 InterContinental; Tech info needed!, Fortra, 2007/10/28

[Amps] LK 500 ZA bandswitch, dave arruzza, 2007/10/25

• Re: [Amps] LK 500 ZA bandswitch, jeremy-ca, 2007/10/25
• Re: [Amps] LK 500 ZA bandswitch, Van K7VS, 2007/10/25

[Amps] Dentron 160-10L, roller, 2007/10/24

• Re: [Amps] Dentron 160-10L, Scott McGrath, 2007/10/24
• [Amps] al-811 Blowing fuses Like Crazy, TROY D SINGLETON-N5ARK, 2007/10/26
  • Message not available
    • Re: [Amps] al-811 Blowing fuses Like Crazy, TROY D SINGLETON-N5ARK, 2007/10/26
    • Message not available
    • Re: [Amps] al-811 Blowing fuses Like Crazy, TROY D SINGLETON-N5ARK, 2007/10/28

[Amps] Prime Instruments/Ameritron and MFJ/Ameritron, David J Windisch, 2007/10/22

• Re: [Amps] Prime Instruments/Ameritron and MFJ/Ameritron, Pete Smith, 2007/10/22

[Amps] PEP Wattmeters, Larry, 2007/10/18

• Re: [Amps] PEP Wattmeters, John., 2007/10/18
  • Re: [Amps] PEP Wattmeters, Larry, 2007/10/18
    • Re: [Amps] PEP Wattmeters, Alek Petkovic, 2007/10/19
  • Re: [Amps] PEP Wattmeters, Saandy Eban, 2007/10/19
    • Re: [Amps] PEP Wattmeters, Larry, 2007/10/19
    • Re: [Amps] PEP Wattmeters, martin, 2007/10/19
    • [Amps] Swap GU74 for 3CX400A7/8874, Andy Pfeiffer, 2007/10/19
    • Re: [Amps] PEP Wattmeters, David Cutter, 2007/10/20

[Amps] Fans, tjjapha@earthlink.net, 2007/10/18

• Re: [Amps] Fans, Jim Brown, 2007/10/23

[Amps] WANTED: 3" Squirrel Cage Blower, w2cqm@juno.com, 2007/10/18

• Re: [Amps] WANTED: 3" Squirrel Cage Blower, superberthaguy, 2007/10/18

[Amps] T/R schemes in Homebrew Amps, Lee Buller, 2007/10/18

• Re: [Amps] T/R schemes in Homebrew Amps, jeremy-ca, 2007/10/18
• [Amps] T/R schemes in Homebrew Amps, Peter Chadwick, 2007/10/18

[Amps] Amateur Radio Vet Turns 100, John Lyles, 2007/10/17

• Re: [Amps] Amateur Radio Vet Turns 100, k7rdx, 2007/10/17
  • Re: [Amps] Amateur Radio Vet Turns 100, John/K4WJ, 2007/10/17
    • Re: [Amps] Amateur Radio Vet Turns 100, Paul Christensen, 2007/10/17
    • Re: [Amps] Amateur Radio Vet Turns 100, schuetzen, 2007/10/17
    • Re: [Amps] Amateur Radio Vet Turns 100, John/K4WJ, 2007/10/18

[Amps] SB-220 Still testing, Darryl Kwasny, 2007/10/16

• Re: [Amps] SB-220 Still testing, Gary Smith, 2007/10/16

[Amps] Needed Info, Ronald, 2007/10/15

• Re: [Amps] Needed Info, W5CUL, 2007/10/15

[Amps] PT2500A, Donald Fox, 2007/10/15

• Re: [Amps] PT2500A, schuetzen, 2007/10/15
  • Re: [Amps] PT2500A, Nils Petter Pedersen, 2007/10/15
• [Amps] PT2500A, Donald Fox, 2007/10/15

[Amps] Do doorknobs go bad, Darryl Kwasny, 2007/10/15

• Re: [Amps] Do doorknobs go bad, jeremy-ca, 2007/10/15
• Re: [Amps] Do doorknobs go bad, Peter Chadwick, 2007/10/15

[Amps] B /W PT2500A, Donald Fox, 2007/10/15

• Re: [Amps] B /W PT2500A, jeremy-ca, 2007/10/15

Re: [Amps] Some thoughts on a transistorized legal limit, kg7hf, 2007/10/15

• Re: [Amps] Some thoughts on a transistorized legal limit, Radio WC6W, 2007/10/16

[Amps] What is happening?, Peter Chadwick, 2007/10/15

• Re: [Amps] What is happening?, schuetzen, 2007/10/15
• Re: [Amps] What is happening?, d.cutter, 2007/10/15
  • Re: [Amps] What is happening?, Roger, 2007/10/15

[Amps] looking, roller, 2007/10/14

• [Amps] looking, roller, 2007/10/30

[Amps] follow-up to Titan 425 problems, David J Windisch, 2007/10/14

• Re: [Amps] follow-up to Titan 425 problems, Joe Giacobello, 2007/10/15

Re: [Amps] What were the problem date codes for Eimac 8877s?, John Farber, 2007/10/14

• Re: [Amps] What were the problem date codes for Eimac 8877s?, Peter Chadwick, 2007/10/14

Re: [Amps] Some thoughts on a transistorized legal limitamplifier..., ToddRoberts2001, 2007/10/13

• Re: [Amps] Some thoughts on a transistorized legal limitamplifier..., Radio WC6W, 2007/10/14
  • Re: [Amps] Some thoughts on a transistorized legallimit amplifier..., Steve Thompson, 2007/10/14

[Amps] Some thoughts on a transistorized legal limit amplifier..., Radio WC6W, 2007/10/13

• Re: [Amps] Some thoughts on a transistorized legal limitamplifier..., Steve Thompson, 2007/10/13

[Amps] SB-230 Amp Retrofit, Harry Brown, 2007/10/12

• Re: [Amps] SB-230 Amp Retrofit, Roger, 2007/10/12
• Re: [Amps] SB-230 Amp Retrofit, Bob Miller, 2007/10/12
  • Re: [Amps] SB-230 Amp Retrofit, jeremy-ca, 2007/10/12
• Re: [Amps] SB-230 Amp Retrofit, Rob Frohne, 2007/10/15

[Amps] Trimming the transmission line, Barry Kirkwood, 2007/10/11

• Re: [Amps] Trimming the transmission line, Gary Smith, 2007/10/11
  • Re: [Amps] Trimming the transmission line, jeryb77, 2007/10/11
• Re: [Amps] Trimming the transmission line, Saandy Eban, 2007/10/12
• Re: [Amps] Trimming the transmission line, rgroh, 2007/10/11
• Re: [Amps] Trimming the transmission line, Peter Chadwick, 2007/10/12
  • Re: [Amps] Trimming the transmission line, Gary Smith, 2007/10/12
• [Amps] Trimming the transmission line, Peter Chadwick, 2007/10/12

[Amps] Let down, Peter Chadwick, 2007/10/11

• Re: [Amps] Let down, Peter Voelpel, 2007/10/11
• Re: [Amps] Let down, Mike, K6BR, 2007/10/11
• Re: [Amps] Let down, jeremy-ca, 2007/10/11

[Amps] Hmmm...interesting data sheet, Gudguyham, 2007/10/11

• Re: [Amps] Hmmm...interesting data sheet, jeremy-ca, 2007/10/11

[Amps] TenTec Titan 425 HV filter caps, David J Windisch, 2007/10/10

• Re: [Amps] TenTec Titan 425 HV filter caps, rgroh, 2007/10/10
  • Re: [Amps] TenTec Titan 425 HV filter caps, Jim Brown, 2007/10/11

Re: [Amps] How about a Solid State MARS amp, kg7hf, 2007/10/10

• Re: [Amps] How about a Solid State MARS amp, kg7hf, 2007/10/11
  • Re: [Amps] How about a Solid State MARS amp, Tom Rauch, 2007/10/11
    • Re: [Amps] How about a Solid State MARS amp, schuetzen, 2007/10/12
    • Re: [Amps] How about a Solid State MARS amp, Tom Rauch, 2007/10/12
  • Re: [Amps] How about a Solid State MARS amp, schuetzen, 2007/10/11
• Re: [Amps] How about a Solid State MARS amp, kg7hf, 2007/10/11
  • Re: [Amps] How about a Solid State MARS amp, schuetzen, 2007/10/11
  • Re: [Amps] How about a Solid State MARS amp, Tom Rauch, 2007/10/12
    • Re: [Amps] How about a Solid State MARS amp, schuetzen, 2007/10/12
• Re: [Amps] How about a Solid State MARS amp, kg7hf, 2007/10/11
• Re: [Amps] How about a Solid State MARS amp, kg7hf, 2007/10/12
  • Re: [Amps] How about a Solid State MARS amp, schuetzen, 2007/10/12
    • Re: [Amps] How about a Solid State MARS amp, w5ba, 2007/10/12
    • Re: [Amps] How about a Solid State MARS amp, RAY FRIESS, 2007/10/12
• Re: [Amps] How about a Solid State MARS amp, kg7hf, 2007/10/12

[Amps] CB etc Amps, Peter Chadwick, 2007/10/10

• Re: [Amps] CB etc Amps, Gary Smith, 2007/10/10
  • Re: [Amps] CB etc Amps, Tom Rauch, 2007/10/10
    • Re: [Amps] CB etc Amps, Roger, 2007/10/10
• Re: [Amps] CB etc Amps, Peter Chadwick, 2007/10/10
• Re: [Amps] CB etc Amps, Steve Katz, 2007/10/10
  • Re: [Amps] CB etc Amps, Roger, 2007/10/10
  • Re: [Amps] CB etc Amps, jeremy-ca, 2007/10/10
• Re: [Amps] CB etc Amps, d.cutter, 2007/10/11
  • Re: [Amps] CB etc Amps, Tom Rauch, 2007/10/11

Re: [Amps] CB Amps or full spectrum???, Steve Katz, 2007/10/10

• Re: [Amps] CB Amps or full spectrum???, rgroh, 2007/10/10
• Re: [Amps] CB Amps or full spectrum???, Peter Chadwick, 2007/10/10
  • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, Tom Rauch, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, Tom Rauch, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, EP Swynar, 2007/10/11
  • Re: [Amps] CB Amps or full spectrum???, Tom Rauch, 2007/10/10
• [Amps] CB Amps or full spectrum???, Peter Chadwick, 2007/10/10
  • Re: [Amps] CB Amps or full spectrum???, Ian White GM3SEK, 2007/10/11
    • Re: [Amps] CB Amps or full spectrum???, Tom Rauch, 2007/10/11
    • Re: [Amps] CB Amps or full spectrum???, Dan Evans, 2007/10/11
    • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/11
    • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/11
• [Amps] CB Amps or full spectrum???, Trent and Lorraine Sampson, 2007/10/11

Re: [Amps] Amps Digest, Vol 58, Issue 10, DAVE WRIGHT, 2007/10/07

• Re: [Amps] Amps Digest, Vol 58, Issue 10, EP Swynar, 2007/10/07

[Amps] Henry 2K, R. David Eagle, 2007/10/06

• Re: [Amps] Henry 2K, Mike McCarthy, W1NR, 2007/10/07
  • Re: [Amps] Henry 2K, Pat Barthelow, 2007/10/07

Re: [Amps] HF amp output power dropping, jordan moser, 2007/10/06

• Re: [Amps] HF amp output power dropping, EP Swynar, 2007/10/06
  • [Amps] EIMAC APP NOTES, COMPLETE, Pat Barthelow, 2007/10/06
    • Re: [Amps] EIMAC APP NOTES, COMPLETE, Roger Halstead, 2007/10/07
    • [Amps] GLA 1000B Transformer Wanted, Adrian Rees (MW1LCR), 2007/10/07
    • Re: [Amps] EIMAC APP NOTES, COMPLETE, Bob Sutton, 2007/10/07
    • Re: [Amps] EIMAC APP NOTES, COMPLETE, Steve Thompson, 2007/10/07
    • Re: [Amps] EIMAC APP NOTES, COMPLETE, Steve Thompson, 2007/10/07
• Re: [Amps] HF amp output power dropping, Tom Rauch, 2007/10/06
  • Message not available
    • Re: [Amps] HF amp output power dropping, Tom Rauch, 2007/10/07
• Re: [Amps] HF amp output power dropping, Mike Willis, 2007/10/06
• [Amps] HF amp output power dropping, Peter Chadwick, 2007/10/08

[Amps] OM2500HF, Oleg, RA3DNC, 2007/10/05

• Message not available
  • Re: [Amps] OM2500HF, Oleg, RA3DNC, 2007/10/05
• [Amps] Amp ON and OFF, Andy Pfeiffer, 2007/10/05

[Amps] 813 sockets needed, jeremy-ca, 2007/10/05

• Re: [Amps] 813 sockets needed, Radio WC6W, 2007/10/05

[Amps] 3-500Z, Hsu, 2007/10/05

• [Amps] CB Amps or full spectrum???, chasm, 2007/10/09
  • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/09
    • Re: [Amps] CB Amps or full spectrum???, EP Swynar, 2007/10/09
  • Re: [Amps] CB Amps or full spectrum???, Vic K2VCO, 2007/10/09
    • Re: [Amps] CB Amps or full spectrum???, EP Swynar, 2007/10/09
    • Message not available
    • Message not available
    • [Amps] How about a Solid State MARS amp??? fwiw, chasm, 2007/10/10
    • Re: [Amps] How about a Solid State MARS amp??? fwiw, Steve Thompson, 2007/10/10
    • Re: [Amps] How about a Solid State MARS amp??? fwiw, RAY FRIESS, 2007/10/10
    • Message not available
    • Message not available
    • Re: [Amps] CB Amps or full spectrum???, schuetzen, 2007/10/12
  • Re: [Amps] CB Amps or full spectrum???, Tom Rauch, 2007/10/09
    • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/09
    • Re: [Amps] CB Amps or full spectrum???, RAY FRIESS, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, Peter Voelpel, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, RAY FRIESS, 2007/10/10
    • Re: [Amps] CB Amps or full spectrum???, jeremy-ca, 2007/10/10

[Amps] Vacuum coax T/R relay, John Lyles, 2007/10/04

• Re: [Amps] Vacuum coax T/R relay, Peter Voelpel, 2007/10/04

[Amps] Anyone build a GU5B?, Tom Rauch, 2007/10/04

• Re: [Amps] Anyone build a GU5B?, Roman Hanovych, 2007/10/04
  • Re: [Amps] Anyone build a GU5B?, Steve Thompson, 2007/10/04
    • Re: [Amps] Anyone build a GU5B?, Peter Voelpel, 2007/10/04
    • Re: [Amps] Anyone build a GU5B?, Tom Rauch, 2007/10/04
  • Re: [Amps] Anyone build a GU5B?, Tom Rauch, 2007/10/04
    • Re: [Amps] Anyone build a GU5B?, jeremy-ca, 2007/10/04
    • Re: [Amps] Anyone build a GU5B?, Larry, 2007/10/04
    • Re: [Amps] Anyone build a GU5B?, k7rdx, 2007/10/04
    • Re: [Amps] Anyone build a GU5B?, Roman Hanovych, 2007/10/05
    • Re: [Amps] Anyone build a GU5B?, Alex Malyava, 2007/10/05
    • Re: [Amps] Anyone build a GU5B?, Peter Voelpel, 2007/10/05

[Amps] oil filled caps, kd4lyh, 2007/10/04

• Re: [Amps] oil filled caps, Peter Chadwick, 2007/10/04
  • Re: [Amps] oil filled caps, Tom Rauch, 2007/10/04

[Amps] Switching off Drake L-4B occasionally trips mains RCD, Alan Ibbetson, 2007/10/03

• Re: [Amps] Switching off Drake L-4B occasionally trips mains RCD, Tony Brock-Fisher, 2007/10/03
• Re: [Amps] Switching off Drake L-4B occasionally trips mains RCD, Robert Morris, 2007/10/03

[Amps] 8877 Grid Trip timing, Rick Stealey, 2007/10/02

• Re: [Amps] 8877 Grid Trip timing, Tom Rauch, 2007/10/02
  • Re: [Amps] 8877 Grid Trip timing, Jim Tonne, 2007/10/02
    • Re: [Amps] 8877 Grid Trip timing, Karl-Arne Markström, 2007/10/02
    • Re: [Amps] 8877 Grid Trip timing, Jim Tonne, 2007/10/02
    • Re: [Amps] 8877 Grid Trip timing, Steve Thompson, 2007/10/02
    • [Amps] Vacuum Ant Relay; Sell, Pat Barthelow, 2007/10/03
    • Re: [Amps] 8877 Grid Trip Timing, Pat Barthelow, 2007/10/04
• [Amps] 8877 Grid Trip timing, Rick Stealey, 2007/10/02
• [Amps] 8877 Grid Trip timing, Peter Chadwick, 2007/10/02
  • Re: [Amps] 8877 Grid Trip timing, jeremy-ca, 2007/10/02

[Amps] Flashover and QSK board in TT Centurion, Ignacy Misztal, 2007/10/01

• Message not available
  • Re: [Amps] Flashover and QSK board in TT Centurion, Ignacy Misztal, 2007/10/01
• Re: [Amps] Flashover and QSK board in TT Centurion, Tom Rauch, 2007/10/01
  • Re: [Amps] Flashover and QSK board in TT Centurion, Ignacy Misztal, 2007/10/01
    • Re: [Amps] Flashover and QSK board in TT Centurion, Tom Rauch, 2007/10/01
• Re: [Amps] Flashover and QSK board in TT Centurion, Ignacy Misztal, 2007/10/04
• Re: [Amps] Flashover and QSK board in TT Centurion, rgroh, 2007/10/01

Re: [Amps] 4CX250 IMD, Gary Schafer, 2007/10/01

• [Amps] 4CX250 IMD, Peter Chadwick, 2007/10/01
  • Re: [Amps] 4CX250 IMD, Steve Thompson, 2007/10/01
    • Re: [Amps] 4CX250 IMD, Karl-Arne Markström, 2007/10/01
    • Re: [Amps] 4CX250 IMD, jeremy-ca, 2007/10/01
• Re: [Amps] 4CX250 IMD, Steve Thompson, 2007/10/01
  • Re: [Amps] 4CX250 IMD, jeremy-ca, 2007/10/01
    • Re: [Amps] 4CX250 IMD, Steve Thompson, 2007/10/01