Peter,
As the flux density changes, so does the volts per turn. M6 and Hipersil have
the highest flux density of the CRGO steels that only have steel and silicon in
it.
Best,
Will
*********** REPLY SEPARATOR ***********
On 4/18/05 at 9:10 AM G3rzp@aol.com wrote:
In a message dated 18/04/2005 12:28:29 GMT Standard Time, r@somis.org writes:
I have observed that Hipersil core transformers have substantially more
volts per turn than conventional core transformers.
Does that apply to E and I core Hipersil, or C core?
If you can run at higher flux densities, then you will get that.
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|