>
>Check out www.qsl.net/la6fja/ts2000.html for a writeup on the new Kenwood
>TL-933 solid-state HF + 6M amplifier. There's some serious info here, but
>it will require some creativity, because the English looks like it was
>generated by some sort of first-generation Japanese-to-English translation
>software. A sample:
>
>"In power amplifier unit, the RF power MOS FET of high resisting pressure
>(the 2SK410) 4 the broadband amplifier which is used 4 circuit mounting. In
>addition, in the output circuit of the power amplifier the Single Ended
>Push-Pull which breaks down the fault of the load push pull circuit due to
>former trance coupling scheme (the SEPP) you adopt the circuit. The IMD
>quality which with output and the former system which is room was not
>obtained from these, is superior was actualized."
>
As I understand it, "trance coupling" eliminates the need for coupling
capacitors and/or transformers. The schematic-diagram symbol for a
trance coupler looks something like this: _¿?_.
cheerio
>
>
>73, Pete N4ZR
>www.qsl.net/n4zr
>
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|