Check out www.qsl.net/la6fja/ts2000.html for a writeup on the new Kenwood
TL-933 solid-state HF + 6M amplifier. There's some serious info here, but
it will require some creativity, because the English looks like it was
generated by some sort of first-generation Japanese-to-English translation
software. A sample:
"In power amplifier unit, the RF power MOS FET of high resisting pressure
(the 2SK410) 4 the broadband amplifier which is used 4 circuit mounting. In
addition, in the output circuit of the power amplifier the Single Ended
Push-Pull which breaks down the fault of the load push pull circuit due to
former trance coupling scheme (the SEPP) you adopt the circuit. The IMD
quality which with output and the former system which is room was not
obtained from these, is superior was actualized."
73, Pete N4ZR
www.qsl.net/n4zr
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|