Amps
[Top] [All Lists]

[AMPS] basic question about dipping the plate

To: <amps@contesting.com>
Subject: [AMPS] basic question about dipping the plate
From: Michael Tope" <W4EF@dellroy.com (Michael Tope)
Date: Mon, 23 Apr 2001 02:14:16 -0700
Hi Rich, 

Since a dipmeter doesn't measure impedance, how could I use one to prove that
the input impedance of an L-network at resonance doesn't look like a dead short 
circuit?

Mike, W4EF......

> >
> >I believe that is only true if there is no load connected across the shunt 
> >side of the L-network. 
> >In that case the L-network simply becomes a hi-q series resonant trap to 
> >ground (e.g. a near
> >dead short). Connect a finite resistive load across the shunt element and 
> >that is no longer true.
> 
> ?  Try proving this with a dipmeter, Mike.   
> 



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>