>
>>
>>Steve, and all-
>>I am sorry- mine was an inappropriate 'knee-jerk' response to Rich's
>frequent , similar, answers to anything found wrong with an MFJ product.
>>
I mentioned that Heath's SB-220 and Kenwood's TL-922 have the same
problem. I have spoken with numerous 922 owners who have a welded on/off
switch, who turn their 922s off and on by plugging the power cord in.
>>You are right- I should NOT have put it on the list. I will try to
>contain myself more, in the future.
>>
>>Sorry- Bill- W4BSG ( and- I really hope you can find a good replacement
>switch.)
>>
>>At 08:20 AM 1/6/01 -0400, you wrote:
>>>
>>>At 07:06 PM 1/5/01 -0600, you wrote:
>>>>
>>>>I am making bet with myself on how long until Measures assures us it is
>>>>just another failure from a VHF parasitic, caused by too much Georgia and
>>>>Mississippi Clay.
>>>>
>>>>Bill-W4BSG
>>>>
Bill -- do you feel that the 1000pF B+ bypass is part of the 120Hz ripple
filter?
>>>Hi Bill,
>>>
>>>I do not see why you bothered to reply to my question is such an
>inappropriate
>>>way. This forum is not for personal digs. I believe that you owe everyone
>>>that
>>>is subscribed here an apology.
>>>
>>>/s/ Steve, N2CKH
>>>
>>>http://www.qsl.net/n2ckh
>>>
>>>
>>>--
>>>FAQ on WWW: http://www.contesting.com/FAQ/amps
>>>Submissions: amps@contesting.com
>>>Administrative requests: amps-REQUEST@contesting.com
>>>Problems: owner-amps@contesting.com
>>>
>>>
>-
>Bill Aycock --- Persimmon Hill
> Woodville, Alabama, US 35776
> (in the N.E. corner of the State)
> W4BSG -- Grid EM64vr
> baycock@HiWAAY.net
> w4bsg@arrl.net
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|