At 10:07 PM 1/5/01 -0800, you wrote:
>>
>>I've had the same thing happen with those rocker switches in other
>>equipment. It means nothing more than: "you need a new switch."
>>When the contacts get bad, they get hot enough to melt and the
>>springs kick everything out on the floor.
>
>The TL922 and the SB-220 have the same problem. The fix is to install a
>stepstart circuit using the original, way too slow T/R relay and two,
>25-ohm, 10w resistors. see Figure 1 on my Web site.
>
>
Hi Rich,
I am considering that. There is ample room inside the chassis. I only
picked this toy up to get a bit of QRO on 160m this season as I have
no time to either mod my SB-220 or the Collins 204F with my new job
and travel considerations. I bought it used, it is like new, but these things
happen day one some times. The design of the amp is not bad, but it
is what it is cheap.
/s/ Steve, N2CKH
http://www.qsl.net/n2ckh
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|