Hi again
I should have been a bit more detailed.
The two heavy wires red & black are split and shrink wrapped
inside the red hood of the connector to make Y's on the end.
73
Peter
VA3PKH.
ki0dz@space.com wrote:
> On Fri, 15 June 2001, Peter Hodgson wrote:
>
> > my 840 is connected as follows: looking at the rear of the connector on the
> > cable
> >
> > CLIP
> > - +
> > O O O centre pin is squared
> > - +
> > O O O outer pins are squared
> >
> > hope that helps
> Yes, I think it does. Thanks! However, I'm wondering if it's just a
> simple case of jumpering over to make two positives and two negatives. My
> only other real experience with a Yeasu HF rig is the 757 and I know that
> with that there is the normal positive and negative terminals, and the other
> two are merely jumpered together with no other connection to power. So, if
> it's just a case of splitting/jumpering to make two positives and two
> negatives, I'm a little confused by the simplicity. :-)
>
> 73, Mary-Frances
> Mary-Frances Bartels *** ki0dz@qsl.net (((#))) ^ ^
> http://www.qsl.net/ki0dz Denver, CO | ^ - ^
> Order Watkins Products www.watkinsonline.com ------- (o o)
> Beyond Infinity - WWW Services ^#092389^ |ooOoo| >{ | }<
> http://members.nbci.com/beyondin ------- RRR)*
>
> ___________________________________________________________________
> Join the Space Program: Get FREE E-mail at http://www.space.com.
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/yaesu
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: owner-yaesu@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/yaesu
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|