On Fri, 15 June 2001, Peter Hodgson wrote:
> my 840 is connected as follows: looking at the rear of the connector on the
> cable
>
> CLIP
> - +
> O O O centre pin is squared
> - +
> O O O outer pins are squared
>
> hope that helps
Yes, I think it does. Thanks! However, I'm wondering if it's just a simple
case of jumpering over to make two positives and two negatives. My only other
real experience with a Yeasu HF rig is the 757 and I know that with that there
is the normal positive and negative terminals, and the other two are merely
jumpered together with no other connection to power. So, if it's just a case
of splitting/jumpering to make two positives and two negatives, I'm a little
confused by the simplicity. :-)
73, Mary-Frances
Mary-Frances Bartels *** ki0dz@qsl.net (((#))) ^ ^
http://www.qsl.net/ki0dz Denver, CO | ^ - ^
Order Watkins Products www.watkinsonline.com ------- (o o)
Beyond Infinity - WWW Services ^#092389^ |ooOoo| >{ | }<
http://members.nbci.com/beyondin ------- RRR)*
___________________________________________________________________
Join the Space Program: Get FREE E-mail at http://www.space.com.
--
FAQ on WWW: http://www.contesting.com/FAQ/yaesu
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
|