Another way is to print out your DXCC sheet from the ARRL. Then you only
have to read your own totals.
Bill W2CQ
On 5/1/2016 9:24 AM, Larry Gauthier (K8UT) wrote:
My apologies to all who encountered that dreaded Session Timeout error
after devoting time to filling out the survey. The session timeout
value in the LimeSurvey application was set for 2 hours, but it is
obvious that the survey timed out much sooner.
After adjusting several settings this morning, my tests indicate that
the server will now timeout after about 20 minutes. That is still not
a lot of time if you are looking up 339 DXCC entities and jumping
back-and-forth between your logging program and the survey. However if
you could create a worksheet in prefix order (the order of the survey)
and do your data entry directly from that worksheet you should be able
to click through the 339 items well-before your session times out.
Here's another suggestion: Set a timer for 10 minutes. If you're not
done by then, >Save Your Session and return later to finish -- the
timer will start over.
Again, my apologies. We really do value the input from all Digital ops
and hope that those of you who were thwarted by a session timeout will
try again.
-larry (K8UT)
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|