Creating a wanted list was the first thing I tried as soon as the survey was
released but I'm using Winlog32 for general logging and that feature is
broken, it has been broken for a while, the last time I was able to do so
was back in Oct 2005... I will have to get creative and do some manual
parsing...
If anyone has any tips I'm all ears (I mean eyes)...
73,
Julio VE3FH
----- Original Message -----
From: "Larry Gauthier (K8UT)" <K8UT@charter.net>
To: "RTTY Reflector" <rtty@contesting.com>
Sent: Sun, May 01, 2016 09:24
Subject: [RTTY] 2016 Digital Mode Most Wanted Survey - Session Timeouts
> My apologies to all who encountered that dreaded Session Timeout error
after
> devoting time to filling out the survey. The session timeout value in the
> LimeSurvey application was set for 2 hours, but it is obvious that the
> survey timed out much sooner.
>
> After adjusting several settings this morning, my tests indicate that the
> server will now timeout after about 20 minutes. That is still not a lot of
> time if you are looking up 339 DXCC entities and jumping back-and-forth
> between your logging program and the survey. However if you could create a
> worksheet in prefix order (the order of the survey) and do your data entry
> directly from that worksheet you should be able to click through the 339
> items well-before your session times out. Here's another suggestion: Set a
> timer for 10 minutes. If you're not done by then, >Save Your Session and
> return later to finish -- the timer will start over.
>
> Again, my apologies. We really do value the input from all Digital ops and
> hope that those of you who were thwarted by a session timeout will try
> again.
>
> -larry (K8UT)
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|