[RTTY] WF1B Problem...

To:	<rtty@contesting.com>
Subject:	[RTTY] WF1B Problem...
From:	w7why@harborside.com (Tom Osborne)
Date:	Wed, 06 Nov 2002 00:35:35 +0000

Jim Martin wrote:
> 

> mode com1: 9600,n,7,1,p (last used about 10 years ago) would this have any
> effect in setting up the port so that WF1B can see it or is this just
> another 'poisson rouge'?

Hi Jim

Isn't the command "mode com1 : 96,n,8,1?"  That is the command I
have in my DOS machines here to set com1 to 9600 baud.  73
Tom W7WHY

<Prev in Thread]	Current Thread	[Next in Thread>
[RTTY] WF1B Problem..., Frank Fallon [RTTY] WF1B Problem..., <MM0BQI@theRSGB.net (Jim Martin) [RTTY] WF1B Problem..., <MM0BQI@theRSGB.net (Jim Martin) [RTTY] WF1B Problem..., John L Merrill [RTTY] WF1B Problem..., <MM0BQI@theRSGB.net (Jim Martin) [RTTY] WF1B Problem..., Tom Osborne <= [RTTY] WF1B Problem..., Jerry Flanders [RTTY] WF1B Problem..., Ekki Plicht [RTTY] WF1B Problem..., M5EET@taf.co.uk [RTTY] WF1B Problem..., Phil Cooper

Previous by Date:	RESULTS: [RTTY] JARTS Log Confirmation, Don Hill AA5AU
Next by Date:	[RTTY] Re: Fw: [CQ-Contest] Computer clock losing time, Tom Osborne
Previous by Thread:	[RTTY] WF1B Problem..., <MM0BQI@theRSGB.net (Jim Martin)
Next by Thread:	[RTTY] WF1B Problem..., Jerry Flanders
Indexes:	[Date] [Thread] [Top] [All Lists]