Hi again Frank, and the gang.............
Sorry John, Moslo will NOT cure Runtime Error 216.
Moslo will only cure the Runtime Error 200.
RTE 216 appears to be an error with the COM ports under Borland Pascal, but
there are other possibilities.
One is that WF1B is trying to occupy that same area of memory as another
program.
On thinking about it Frank, I wonder if you have tried to just get WF1B
running - WITHOUT - any TU?
There may be a problem with the memory thing if you tried to get it to run
with a specific TU that needed software to run.
I am not familiar with the DXP TU you are using, but that may not be helping
at this stage.
As per the post from 5B4AGE, it may pay you to try and get just WF1B to run
without any associated COM ports, or any other software.
If you can get that far, then add the COM ports, and finally the software
for the DXP.
Finally, keep an eye on http://www.plicht.de/ekki/wf1b/ for further news
about an updated version of WF1B.
Vy 73 to all, and see you in WAEDC
Phil GU0SUP
**********************************************************************
This email and any files transmitted with it are confidential
and intended solely for the use of the individual to whom
they are addressed. If you have received this email in error
please notify the author immediately and delete it, together
with all copies, from your system. You are unauthorised to
directly, or indirectly, use, disclose, distribute, print or copy
any part of this message if you are not its intended recipient.
Any views or opinions expressed are solely those of the
author and do not necessarily represent those of
Cable and Wireless Guernsey.
Information held on any of Cable and Wireless Guernseys'
computer systems is the property of Cable and Wireless Guernsey.
Cable and Wireless Guernsey reserves the right to monitor
and review the content of all information, messages and
attachments sent to or from this e-mail address.
**********************************************************************
|