RTTY
[Top] [All Lists]

[RTTY] WF1B Problem...

To: <rtty@contesting.com>
Subject: [RTTY] WF1B Problem...
From: Jim Martin" <MM0BQI@theRSGB.net (Jim Martin)
Date: Tue, 5 Nov 2002 10:49:26 -0000
Lost a bit of my last post somewhere!!  I intended to refer you to the
archives for the helpful replies I received last month.  if you make any
progress there are a lot of us who would like to hear about it.
All the best
Jim    MM0BQI

----- Original Message -----
From: "Jim Martin" <MM0BQI@thersgb.net>
To: "Frank Fallon" <n2ff@optonline.net>; <rtty@contesting.com>
Sent: Tuesday, November 05, 2002 8:21 AM
Subject: Re: [RTTY] WF1B Problem...


> Hi Frank
> I posted the same problem last week and received some useful replies which
> did not help me, but could be the answer to your problems.
> My PC is 1GHz and it will run WF1B as long as I have no port selected for
> the TNC.  As soon a s a port is selected R/T error 216 shows and the
program
> closes.  My 450MHz HP laptop runs the same program fine with no problems
> 73
> Jim    MM0BQI



<Prev in Thread] Current Thread [Next in Thread>