[Amps] AL-811H plate voltage

[Tom Osborne <w7why@frontier.com>]

Hi All

Is there a way to decrease the plate voltage in an AL-811H without using 
a variac?
My line voltage is around 120v or so and the plate voltage in my amp is 
right at 1800 - right at the red mark.
With caps rated at 1800 volts, that seems to be pushing it.  I do have 
it set for buck/boost now.  Thanks and 73
Tom W7WHY

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps