I use the space bar.... Much more convenient. 73 and good luck today! Jim W7RY Setting Writelog for SS this afternoon. When I type in the call sign and hit tab, the cursor moves to Check rather than
1. Wireless networking was not around when Windows 98 was developed. 2. With RF from 7 stations, wireless will most likely be intermittent. 3. With RF from 7 wireless devices, they may be "desensing"
I can see the raw packet spots on my packet screen on Writelog. I also have just loaded VE7CC. I cant see a way to send the received packets to WriteLog. 73 Jim W7RY Oh to healthy, wealthy and wise!
I can't answer that. It was specifically designed for Writelog. It's not surprising that N1MM doesn't support it. And the device has been sold (to me). 73 Jim W7RY --Original Message-- From: writelog
Use a com port with the same single transistor. Works just fine. 73 Jim W7RY Hey If some who is not in the middle of the contest could help...I am setting up a hunt and ponce station in a multi singl
Read the rules. They will tell you how many points a particular state, zone, country etc are worth. When you put in the call, tap the spacebar. If it shows a new multiplier, then you know it's a mult
Writelog has: CW decoder Real rotor control A real band map What K1MM has: An attitude. When I inquired about rotor control, I was told in so many ways that the rotor feature is not needed in contest
Email it to you local FedEx Kinko's. They will gladly print it and send it to you.... For a small fee. 73 Jim W7RY Does anyone have the time and resources to print out and ship to me the most recent
It's in there!! Just read the manual! (I don't know how to do it off the top of my head)... I did it not to long ago for RTTY roundup! Jim W7RY The same here, why NO Cabrillo? _______________________
With all of the contests that I have operated in, I have never set up bands in Writelog. Why do you think you need to? On 40 meters, there are RTTY stations as low as 7020 depending on what country t
You need to look at the settings in your writelog.ini file. Here is where you set up your baud rate. Don't set the baud rate in windows because writelog.ini is where this is done. There is a section
Ric. All of the baud rates are set in writelog.ini under the ports heading. Here is a copy of my ports section from my writelog.ini file. [PORTS] dvktype=2 dvkport=4 cwtype=1 cwport=1 dvkstoploop=1 d
The .ini file actually has the final say. If you change it there... I'm sure it will work. 73 Jim W7RY --Original Message-- From: writelog-bounces@contesting.com [mailto:writelog-bounces@contesting.c
The only thing that comm 1-4 are used for is Rigs. Let me qualify that though... Packet can use 1-8, RTTY can use 1-8. But rigs can be set up on comm. 1-4. Also, comm. 1-4 can be used for CW generati
I have a new never used Multi Keyer for sale. With printed instructions (which also available on the web). Take a look at: http://www.writelog.com/SO2R/w5xd_multikeyer.htm $90.00 shipped in the lower
The multikeyer is sold. Thanks Jim I have a new never used Multi Keyer for sale. With printed instructions (which also available on the web). Take a look at: http://www.writelog.com/SO2R/w5xd_multike
EBay is a great place to look for sound cards. Just watch the shipping charges! 73 Jim W7RY to You won't find the Turtle Beach Santa Cruz in stores any more. You might find a few on eBay. -- Jim Reis
Or simply change it in writelog.ini to whatever you want. 73 Jim W7RY --Original Message-- From: writelog-bounces@contesting.com [mailto:writelog-bounces@contesting.com] On Behalf Of David J. Strout
Go to the TU type dropdown in the rtty screen. Then simply select MMTTY towards the bottom of the list. 73 Jim Hi, Just got a chance to install one of my Christmas presents and have copied all the in
I don't think you can do mode selection with the 751A. But you can do frequency commands. If the rig is sending the current band info to Writelog, there is no reason that it won't receive the info. L