I can see the raw packet spots on my packet screen on Writelog.
I also have just loaded VE7CC. I cant see a way to send the received
packets to WriteLog.
73
Jim W7RY
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Gary Senesac AL9A
Sent: Wednesday, November 23, 2005 8:28 PM
To: Writelog List
Subject: Re: [WriteLog] SS packet spots
Oh to healthy, wealthy and wise! Thanks to all who replied about my
"problem". Since I use a laptop for my station PC I am stuck with only
one
video card and a desk surface area too small to support two monitors
anyway.
I just acquired a 19" LCD monitor so I'll have to see if I can find a
way to
scrunch the VE7CC window down so I can kepp it open on the desktop and
monitor the raw spots as they arrive. Thanks again.
Gary AL9A
----- Original Message -----
From: "FireBrick" <w9ol@billnjudy.com>
To: "Gary Senesac AL9A" <al9a@pobox.mtaonline.net>; "Writelog List"
<writelog@contesting.com>
Sent: November 23, 2005 3:05 AM
Subject: Re: [WriteLog] SS packet spots
> I use ARUser, a cluster/spot/filtering/everything program to connect
to
the clusters and
> it forwards the spots to Writelog.
> I keep ARUser on one monitor and set the filters to pass on SS type
spots.
> That way I have both worlds, qsy capability from WL and can watch for
those needed
> sections on the ARU screen.
> ARU can be found at www.bcdxc.org/ve7cc/default.htm#prog
>
>
> and each year, a couple of clusters change to SS spots only. Quite
popular
during SS.
>
>
> ----- Original Message -----
> From: "Gary Senesac AL9A" <al9a@pobox.mtaonline.net>
> To: "Writelog Reflector" <writelog@contesting.com>
> Sent: Tuesday, November 22, 2005 11:09 PM
> Subject: [WriteLog] SS packet spots
>
>
> > Ran the SS this year as an Unlimited station for the first time.
Actually
> > only the second contest I've used spotting clusters. I found it
very
useful
> > in the CQWW SSB for spotting mults, but was under whelmed by what I
was
> > seeing in the SS contest.
> >
> > The spots would display on the bandmap ok, but the when they showed
up
in
> > the spots window in WL all I was seeing was the callsign and the
spot
time.
> > What I had hoped to see was info about which section the station was
> > actually giving out. I needed NNY, ME and RI, but many of the 1's
and
2's I
> > went chasing after were in ENY, WNY, NLI, FL, TX, CA, or virtually
anyplace
> > BUT the needed areas. Is there anyway to configure either WL or the
cluster
> > info to display the section of the spotted station??? I use VE7CC's
cluster
> > interface.
> >
> > Also, I was having trouble with the check boxes in the WL spots
window.
If
> > I checked the Mults box, I got no spots at all. I assume since
there
was no
> > info coming through about which section the call was in there was no
way
for
> > WL to determine if it was a needed mult. Even more puzzling was if
I
> > checked the In Band box, I still got spots from other bands. For
example,
> > if I was on 15M I was getting spots for 15M as well as 20M, 40M,
etc.
Call
> > me confused!
> >
> > Gary AL9A
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|