Norm is still around, he sent me replacement parts for my T2X just lask week, after talking to him on the phone. _______________________________________________ ______________________________________
I hope this is ok to ask. I just bought EZNEC 5.0 to give me an idea of my antennas and projects for field day, etc. I am wondering if anyone is willing to share with me their modeling files for the
I just got done rebuilding a 30 year old T2X with the same issues that you described. I ended up having Norm from Norm's Rotor's send me some grease that they use for their rebuilds. It was semi-thic
I am sort of an oil guy... I guessed the blue grease was a lithium based marine grease. Looked and felt a lot like what I used for my marine trailer's bearings. I could of course be wrong... not exac
I think you mis-read my post. Grease is a form of oil is what I was referring to. I'd only use grease on a non-sealed system, unless I wanted to lube it once a week. I remember being taught by an ex-
I have the exact same setup that you have with the exception that I converted my XM240 into a D40 (just used driven element) due to the fact that my mast is an unknown steel of 2"OD and .125" walls t
Each time you tune the lower band, the higher band will be affected (amount depends on your installation). I added 30m/17m dipoles to my Alpha Delta DX-CC fan dipole and it worked just fine, with two
AT THE ROTOR YAESU P/N: S8100639 Cost $48.00 Commercial P/N :Nanaboshi NJC-207-PF Cost at Kinetic Technologies $11.20 Telephone 800-877-1521. 3 week delivery, no minimum order. AT THE CONTROL BOX YAE
My bet is it was spoofed or he was hacked. Usually that's what I am seeing now. It's also silly that two guys would publicly flame the second poster when: "It certainly took Mikes company down a notc
The way I am reading this is that Jorge was quoting Arrow's statement saying that the customer service rep at Arrow was pointing the finger at themselves and credited Jorge's credit card for the bad
Does anyone have a recent model motorized LM470/LM354HD using the Nord gearbox that could provide me with pictures of the motor/gearbox setup? I have a LM354HD with Nord gearbox and am interested in