Norm, We did test the Senao and it worked here, but we only did function testing and did not run the unit more than a few hours. So you don't have to send the radio/liver in :) When our guys get back
A good link should have as close to zero retransmits as you can get. I don't really have a hard number, but from talking around anything over 3% to 5% really slows down the network. Doug Harman KarlN
Dan, If I understand your question you are looking for a Linux Base Station on a AP-1000. If so we have done some work on this, but do not have a schedule of releasing this. The main issue is perform
Chris, The AP can use either a public or private IP address at the Base Station. The main Con is you can't manage the AP if it is a private IP across the internet if you need too. The CPE devices nee
Terry is correct here. Full Duplex is only reached if you have the exact same data going up and down stream. If this is true then you get the theoretical 22Mbps. Doug Harman KarlNet, Inc. 525 Metro P
Lucent bought drivers from a third party instead of doing their own. When we have access to the radio code this is an easy process. We have tried and been unsuccessful (meaning it worked, but was so
This is something I have, let me know if it helps. It is about loading the bin files. Doug Harman Attachment: Uploading Ver 4 Software.doc Description: MS-Word document Attachment: license-it instruc
Bill, This means you don't have a link. The typical cause is the system access pass phrases are not matching or the net ID numbers don't match. Doug Harman KarlNet, Inc. 525 Metro Place North Suite 1
Barry, Doug Harman KarlNet, Inc. 525 Metro Place North Suite 100 Dublin, OH 43017 614 822-5275 x 123 614 822-0024 fax Attachment: Upload Flashrom.doc Description: MS-Word document
Eric, If you are talking about the High, Medium, Standard, and Low for the radio in the Interface Menu then the answer is no. Doug Harman KarlNet, Inc. 525 Metro Place North Suite 100 Dublin, OH 4301
Charles, I don't think it's a PITA :) But we are human and can't do it as fast as we'd like ideally. Doug Harman KarlNet, Inc. 525 Metro Place North Suite 100 Dublin, OH 43017 614 822-5275 x 123 614
If you want a new key send an email to support@karlnet.com and request one. Be sure to explain the reason why you want one ie. wrong MAC, bad equipment, etc. An RMA # with the equipment is a help. Of
Norm, Didn't you get the key.. I sent it a while back. Doug Harman KarlNet, Inc. 525 Metro Place North Suite 100 Dublin, OH 43017 614 822-5275 x 123 614 822-0024 fax
Norm, No problem.. I just missed the email.. Then I thought mine back to you got lost. I try to do these as a priority because I know you have to install the equipment to make money. Doug Harman Karl
Karlnet has been thinking about this also. I'd appreciate some feedback on what types of equipment (i.e. antenna types and dB levels, lengths of cable, flat panel, omnis, and sectorized) would be the
The site was written by a database guy that worked for a bank. we made a mistake of doing it in house and believe it or not we don't have any expertise in websites. We are going to revamp the website
Norm, The reseller, if he doesn't send the email, needs to be copied on the email. The reason is we get a purchase order from the reseller so our contract is with the reseller and not the ISP. I beli
We have one of these boards in house and got it to work with our software last week. It will still be a bit longer to test the board and get the product numbers, compile the bin file, and put it on t
Chris, When you download the driver from the website for your O/S there will be a read me file or install file that will give you the steps to load the driver on your PC. Doug Harman KarlNet, Inc. 52
In the readme file is a list of files to delete. I have the one for windows 98, if that is your O/S Doug Harman KarlNet, Inc. 525 Metro Place North Suite 100 Dublin, OH 43017 614 822-5275 x 123 614 8