[Skimmertalk] Skimmertalk Digest, Vol 87, Issue 5 Two skimmer problem

[mail at df4ue.de]

Hi Marco,

try the following:

> start first only Skimserv
>select in the receiver dropdown list of Skimserv:         01 CWSL_Tee on 
><your SDR>
> press apply

now start RTTYSkimserv

you must have the same settings in the .ini file of both Skimserv and 
RTTYSkimserv

for:

> FreqCalibration
> CenterFreqs
> SegmentSel

and (!) in the RTTYSkimserv.ini:

    DeviceName=01 CWSL_Tee on <your SDR>

(After changing the .ini, I have to close and restart RTTYSkimserv, 
otherwise there are no signals and no decoders shown on the GUI of 
RTTYSkimserv.
This behaviuor is new, some month ago I could change the .ini on the fly)

If it is still not working, connect RTTYSkimserv with a telnet client and 
check the device name RTTYSkimserv is seeing with the command:

>  SKIMMER/SDR

The answer you get from RTTYSkimserv is the device name you have to insert 
in the RTTYSkimserv.ini.

This works fine for my QS1R, I think it should also work for your Elad SDR.

73   John DF4UE




-----Ursprüngliche Nachricht----- 
From: skimmertalk-request at contesting.com
Sent: Tuesday, December 22, 2015 6:00 PM
To: skimmertalk at contesting.com
Subject: Skimmertalk Digest, Vol 87, Issue 5

Send Skimmertalk mailing list submissions to
skimmertalk at contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
http://dayton.contesting.com/mailman/listinfo/skimmertalk
or, via email, send a message with subject or body 'help' to
skimmertalk-request at contesting.com

You can reach the person managing the list at
skimmertalk-owner at contesting.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Skimmertalk digest..."


Today's Topics:

   1. Two SkimServs problem (Marco HB9CAT)


----------------------------------------------------------------------

Message: 1
Date: Tue, 22 Dec 2015 17:40:53 +0100
From: "Marco HB9CAT" <hb9cat at thezollingers.org>
To: <skimmertalk at contesting.com>
Subject: [Skimmertalk] Two SkimServs problem
Message-ID: <047701d13cd7$86564150$9302c3f0$@thezollingers.org>
Content-Type: text/plain; charset="us-ascii"

Hi,



I'm experimenting running SkimServ and RttySkimSrv concurrently on the same
receiver as described here:
http://www.reversebeacon.net/downloads/aggregator/Running-RTTYSkimServer-and
-CW-SkimServer.pdf



Receiver is an Elad FDM-DUO, so I'm covering 2 Bands at the same time.



Both servers start fine, the amount of decoders looks right on both servers.
The weird thing is:

-          If I start SkimSrv first, RttySkimSrv is not sending any Spots

-          If I start RttySkimSrv first, SkimSrv is not sending any Spots



As I tested initially, everything was working fine (spots from both), so the
problem must be related to the configuration files.



Did anyone experience this ?



Marco HB9CAT







------------------------------

Subject: Digest Footer

_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk


------------------------------

End of Skimmertalk Digest, Vol 87, Issue 5
******************************************