[Skimmertalk] aggregator ini rotation??

paul_group at greenrover.demon.co.uk paul_group at greenrover.demon.co.uk
Fri Feb 21 14:58:40 EST 2014


None of this is applicable  Pete for reasons that I won't go into in a public forum.

Its no issue, my rbn isn't a life critical application.

The update hasn't behaved like previous, seamless updates which is a pity.

Next time I'm home I will fix it.

Regards Paul

------- Original message -------
> From: Pete Smith N4ZR <n4zr at contesting.com>
> To: paul_group at greenrover.demon.co.uk, skimmertalk at contesting.com
> Sent: 21.2.'14,  21:52
> 
> This should not be necessary, Paul.  If you have Internet communication with the machine, and it has not crashed, you have several options. 
> 
> You can run Skimmer and then Aggregator, separately, without rotation. 
> 
> You can run Aggregator, set your .ini file rotation options, click Start rotation, and Aggregator will start Skimmer for you.
> After you do that, you can stop Aggregator properly (from the task tray) to save any changes in your .ini file.
> 
> You can even set up Windows so that it will start Aggregator in the event of restarting after a power failure, by putting a shortcut to Aggregator in your startup folder.
> 
> A final useful tool.  There are a number of free apps that will restart an app that you designate, even if it crashes.  Take a look at <http://www.raymond.cc/blog/keep-application-running-by-automatically-rerun-when-closed/>.  A nice resource.  We are using one of these little apps on each of the RBN's ARC servers now, to handle the unexpected more gracefully.
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at 
> http://reversebeacon.net, 
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite 
> ARC V6 or VE7CC DX cluster node.
> 
> On 2/21/2014 2:26 PM, paul_group at greenrover.demon.co.uk wrote:
>> I have not fully assessed this information but asit reads those running remote unattended rbn may struggle here.
>> 
>> Anyway I'm off air for a few months til I can get to the machine.
>> 
>> Regards Paul LA/GW8IZR.
>> 
>> ------- Original message -------
>>> From: Pete Smith N4ZR <n4zr at contesting.com>
>>> To: skimmertalk at contesting.com
>>> Sent: 21.2.'14,  21:08
>>> 
>>> Paul, I am running the latest and do not have this issue. The intent in making the Aggregator tray-resident like Skimserv, rather than letting it close from the X is that people were accidentally closing it.  The thought was to make it operate the same wayas SkimServ so habits would be the same.
>>> 
>>> 73, Pete N4ZR
>>> Check out the Reverse Beacon Network at
>>> http://reversebeacon.net,
>>> blog at reversebeacon.blogspot.com.
>>> For spots, please go to your favorite
>>> ARC V6 or VE7CC DX cluster node.
>>> 
>>> On 2/21/2014 12:40 PM, paul_group at greenrover.demon.co.uk wrote:
>>>> Up until the latest upgrade the ini and indeed agregators knowledge of the skimsrv exe location was  retained.
>>>> 
>>>> Unfortunately the latest update doesn't do that on my pc.
>>>> 
>>>> I can't fix it by VPN over the slow hotel wifi so I'm sorry but I  can't advise on your question.
>>>> 
>>>> But up til the latest update mine used to remember the ini file locations during rotation.
>>>> 
>>>> ------- Original message -------
>>>>> From: David Robbins <k1ttt at arrl.net>
>>>>> To: skimmertalk at contesting.com
>>>>> Sent: 21.2.'14,  19:27
>>>>> 
>>>>> I did just upgrade, but it didn't work on the last version I was running
>>>>> either.  Now on 3.0, what is the zero at the start of each line in the
>>>>> skimmer traffic window???
>>>>> 
>>>>> David Robbins K1TTT
>>>>> e-mail: mailto:k1ttt at arrl.net
>>>>> web: http://wiki.k1ttt.net
>>>>> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>>>>> 
>>>>> 
>>>>> -----Original Message-----
>>>>> From: paul_group at greenrover.demon.co.uk
>>>>> [mailto:paul_group at greenrover.demon.co.uk]
>>>>> Sent: Friday, February 21, 2014 17:02
>>>>> To: David Robbins K1TTT
>>>>> Cc: skimmertalk at contesting.com
>>>>> Subject: Re: [Skimmertalk] aggregator ini rotation??
>>>>> 
>>>>> ------- Original message -------
>>>>>> From: David Robbins <k1ttt at arrl.net>
>>>>>> To: skimmertalk at contesting.com
>>>>>> Sent: 21.2.'14,  18:31
>>>>>> 
>>>>>> Is there a trick to making the aggregator remember the ini file
>>>>>> rotation settings when you close and restart it??
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> David Robbins K1TTT
>>>>>> e-mail:  <mailto:k1ttt at arrl.net> mailto:k1ttt at arrl.net
>>>>>> web:  <http://wiki.k1ttt.net/> http://wiki.k1ttt.net AR-Cluster node:
>>>>>> 145.69MHz or  <telnet://k1ttt.net/> telnet://k1ttt.net
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Skimmertalk mailing list
>>>>>> Skimmertalk at contesting.com
>>>>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>>>> 
>>>>> Yeah, don't upgrade to the latest version :-(
>>>>> 
>>>>> GW8IZR Skimmer off air till I get back to uk someday to fix it.
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Skimmertalk mailing list
>>>>> Skimmertalk at contesting.com
>>>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>>> 
>>>>> 
>>>> _______________________________________________
>>>> Skimmertalk mailing list
>>>> Skimmertalk at contesting.com
>>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>> 
>>>> 
>>> _______________________________________________
>>> Skimmertalk mailing list
>>> Skimmertalk at contesting.com
>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>> 
>>> 
>>> 
>>> 




More information about the Skimmertalk mailing list