[Skimmertalk] SDR-IQ boundaries

[Bob Wilson, N6TV]

By default, CW Skimmer ignores all signals in the predefined "RTTY
segments" (as well as beacon frequencies like 14.100).  That is what the
colors indicate.

To change that, use View -> Settings -> Misc tab -> Decode only in the CW
segments (uncheck) or set the "Band Plan" to "CW Contest".

73,
Bob, N6TV

On Wed, Feb 6, 2013 at 4:56 AM, KD7YZ Bob <kd7yz at denstarfarm.us> wrote:

> Hello Skimmertalk people:
>
> I call it a boundary for want of a better term.
>
> I have a  screen-shot  which makes this  question will appear a lot more
> logical.  http://tinyurl.com/begy22t
>
> What I see on the screen, of CWSkimmer, is a dashed line and color
> change at "070". The "Tune" says 28072.47 fwiw. I am using SDR-IQ and
> looking at the IF of my K3. The latter is running the 6m transverter.
>
> Skimmer "Settings" uses SDR-IQ @ 192kHz.  The, greyed out, LO is
> 28082470 .
>
>
> I have Aggregator set to add 22000 for the RBN
>
> Anyway, the question is, at "067" I am decoding "DE WZ8D/B".
>
> At "072.5" I am seeing, and mentally decoding, W9DR/B" , over and over
> for ten minutes a good signal. Yet it does not decode on Skimmer.
>
> So then, what setting do I need to set to have Skimmer see, say, from
> 50.0 to 50.1 ??
>
> thanks for listening.
>
> --
> de Bob KD7YZ
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>