[Skimmertalk] toggle out of recorded play mode in SDRMAX V

Jeff Blaine keepwalking188 at yahoo.com
Wed Apr 17 17:05:37 EDT 2013


Thanks Bob!

73/jeff/ac0c
www.ac0c.com 
alpha-charlie-zero-charlie



From: Bob Wilson, N6TV 
Sent: Wednesday, April 17, 2013 3:21 PM
To: Jeff Blaine 
Cc: SkimmerTalk Reflector 
Subject: Re: [Skimmertalk] toggle out of recorded play mode in SDRMAX V

I don't use SDRMAX so I can't advise, but WinRad and HDSDR can be switched between playback mode and live mode using the Options -> Select Input menu, so there is no need to exit and restart. 

73, 
Bob, N6TV

On Wed, Apr 17, 2013 at 11:56 AM, Jeff Blaine <keepwalking188 at yahoo.com> wrote:

  Thanks Bob.

  I don't switch applications that often so the power off thing is not as big of a deal.

  The reason I was asking about the play/live is that I have been using SDRMAX to listen to recordings of my transmissions to check for quality and bandwidth.  And to do some iterative testing (record, play, adjust, repeat), you need to jump out of live/record and WAV file play.  Exiting the GUI really slows down the process.

  And I was hoping that in the absence of some comments from Phil, one of the other skimmertalk guys would have tinkered around with sdrmax enough to have the answer.  Maybe the ultimate answer is to dump sdrmax and use another SDR app.  sdrmax seems like a rich application, but the lack of any documentation (that I've found) on the functional aspects of the GUI makes the willing struggle unnecessarily. 


  73/jeff/ac0c
  www.ac0c.com
  alpha-charlie-zero-charlie

  -----Original Message----- From: Bob Wilson, N6TV

  Sent: Wednesday, April 17, 2013 1:16 PM 

  To: SkimmerTalk Reflector
  Subject: Re: [Skimmertalk] toggle out of recorded play mode in SDRMAX V


  Thanks for the clarification.   I guess "Phil" is N8VB, developer of the
  QS1R.

  You'll note that Skimmer Server loads its own FPGA code into the QS1R.  I
  beleive that code leaves it in a state that is not compatible with Winrad,
  HDSDR, SDRMAX, etc., unless you do a power cycle to reset everything.  The
  same may apply to SDRMAX; it may leave the QS1R in a state that is
  incompatible with SkimSrv.

  But I'm not sure if that answers your question.

  73,
  Bob, N6TV

  On Wed, Apr 17, 2013 at 10:57 AM, Pete Smith N4ZR <n4zr at contesting.com>wrote:


    SS = Skimmer Server.  for some reason it cannot load its firmware on top
    of the SDRMAX stuff.  Another way is to load CWSkimmer as an interim
    measure, but pulling the power plug on the RX works just as well.

    73, Pete N4ZR
    Check out the Reverse Beacon Network at
    http://reversebeacon.net,
    blog at reversebeacon.blogspot.com.
    For spots, please go to your favorite
    ARC V6 or VE7CC DX cluster node.


    On 4/17/2013 1:43 PM, Bob Wilson, N6TV wrote:


      What's "SS"?  To me it means "ARRL Sweepstakes." ;-)

      Maybe you can forward the "answer back from Dale" (who is Dale?).

      73,
      Bob, N6TV


      On Wed, Apr 17, 2013 at 9:09 AM, Jeff Blaine <keepwalking188 at yahoo.com>** 

      wrote:

      Skimmer has been working fine here on the QS1R other than needing to

        restart the device prior to loading SS.

        I’ve been expanding the use of this handy box into a few more uses. Like
        replaying recorded band samples.

        If anyone knows how to toggle out of WAV file play mode and back to live
        mode, please contact me.

        I’ve not got an answer back from Dale and it’s got me puzzled.

        73/jeff/ac0c
        www.ac0c.com
        alpha-charlie-zero-charlie




  _______________________________________________
  Skimmertalk mailing list
  Skimmertalk at contesting.com
  http://dayton.contesting.com/mailman/listinfo/skimmertalk 



More information about the Skimmertalk mailing list