[Skimmertalk] Making telnet available

Pete Smith n4zr at contesting.com
Sat Oct 31 05:46:47 PDT 2009


Hi Wes et al - I just watched my telnet address for a few weeks and 
determined that it was not changing.  Then I set up my firewall to 
forward the Telnet port to the outside world.  For example, if your 
internal Skimmer telnet address is 127.0.0.1 port 7300, you need to 
configure your firewall to forward that to your external IP address, 
port 7300.  I can't be more specific, because every firewall I have 
worked with - admittedly not very many - has done this differently.

73, Pete N4ZR
New Articles Daily - the Contesting Compendium at http://wiki.contesting.com
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net


On 10/31/2009 8:26 AM, Wes Cosand wrote:
> Folks:
>
> Got a QS1R running yesterday with Skimmer Server.  K1TTT's posts on the QS1R
> reflector made it simple.  It is set on "Agressive" calls, uses a vertical,
> and feeds Reversebeacon.
>
> Could someone who write a couple lines about steps to take to make the
> Skimmer telnet server accessible from outside the home?  I trust the folks
> with their IP address on ReverseBeacon are not paying for static addresses
> but just trusting that their dynamic address is not too dynamic.
>
> Wes, WZ7I
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>
>    


More information about the Skimmertalk mailing list