Quote: I was going over this with another ham buddy who also has an O II,
and he told me that he had developed the same problem. He suggest that I
let HRD time out and try to connect using the Jupiter definition. That
didn't work, but defining the port as an Eagle did. However, this whole
thing was a bit tenuous.
I have a Orion I. I could not get it to talk to my computer running HRD ver5.
I thought the com port was bad on the radio and had it tested . Worked fine
when using Logger 32!
I then test my com1 port on my computer. It word fine with my TS-2000 and HRD.
I also told the HRD to try the Eagle and it started working. I deleted the
Eagle and used the Orion and I was able to get HRD working correctly. Now it
works every time as it should.
I am not sure why the Eagle ver. for HRD started it working correctly. It is
almost like a software switch was changed or turned on in the radio.
Paul, WG0G
WG0G@arrl.net
________________________________
Email addresses of ITT Exelis employees have changed from itt.com to
exelisinc.com. Please update your favorites and contact information to reflect
these changes.
This e-mail and any files transmitted with it may be proprietary and are
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this e-mail in error please notify the sender.
Please note that any views or opinions presented in this e-mail are solely
those of the author and do not necessarily represent those of Exelis Inc. The
recipient should check this e-mail and any attachments for the presence of
viruses. Exelis Inc. accepts no liability for any damage caused by any virus
transmitted by this e-mail.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|