I don't have the internal tuner and don't have a 6 M amp.
If the 6 M amp has a respectable input impedance near 50 ohms, then there
should be no problem. The Omni VII PA works well with SWR of 3:1 or less.
That's a pretty wide range.
73
Bob K4TAX
----- Original Message -----
From: <W0WOI@aol.com>
To: <tentec@contesting.com>
Sent: Monday, January 21, 2008 4:07 PM
Subject: Re: [TenTec] Omni VII on 50 mHz
In a message dated 1/21/2008 3:18:38 P.M. Central Standard Time,
RMcGraw@Blomand.net writes:
I've used a series of DownEast Microwave transverters {144 MHz & 432 MHz}
with my Omni VI Plus and now with my Omni VII with a great degree of
success. I can hear 2M signals off of the moon with a single 10 ele yagi
and the DEM without a mast mounted preamp. That speaks well for the
performance of the DEM transverters and the Omni series of receivers as
the
10 meter IF.
Bob, thanks for that info.
A question about your Omni VII .... has there been an issue using it to
drive a 6-meter amp inasmuch as the ATU doesn't function on 6 meters.
73.
Bill, W0WOI
(My six meter amp is an entirely rebuilt for six only Heath SB-1000.)
**************Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|