hi everyone, i just picked up a paragon I - the guy i purchased it from said it
had a PLL unlock error, but that the radio worked - so far i get no error and
the radio receives wonderfully. i just wired up my shure 444d mic to be used
with this radio and when i key the mic a funny symbol next to the freq. display
comes on - it looks like an E turned on its back with three lines (rays?)
coming out of the bottom of the E - is this the PLL error message? also after
keying the mic there is a slight delay before returning to receive mode? when
the radio returns to receive mode the symbol goes away - i was thinking i have
the mic wired wrong - but it seems to be keying the radio - has anyone ever
seen this - there is no reference to this in the paragon manual. thanks again
for all your time - i have learned a great deal about ten tecs here and i
appreciate all the expert commentary.
sincerely, john
_________________________________________________________________
Need to know the score, the latest news, or you need your Hotmail®-get your
"fix".
http://www.msnmobilefix.com/Default.aspx
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|