TenTec
[Top] [All Lists]

Re: [TenTec] Omni VII - I feel like such a n00b...

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Omni VII - I feel like such a n00b...
From: Alan Sewell <alan.n5na@gmail.com>
Reply-to: alan.n5na@gmail.com, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 08 Dec 2007 14:09:25 -0600
List-post: <mailto:tentec@contesting.com>
With all the posts about the IP address I decided to check my Omni VII to see what the deal is.

I found can set any of the radio IP addresses or G8way IP addresses anywhere between 0.0.0.0 to 255.255.255.255. Also, I noticed mine doesn't have 001 or 002 it just has 1 or 2, no leading zeros.

I'm running the lastest firmware and bootloader as well.

Mine is one of the early Omni VII's so maybe there's a hardware difference.

73,

Alan  N5NA

http://www.tentecwiki.org



Jeff Iddings wrote:
Good evening all!

Is it just me, does the IP setup in the Omni VII not allow you to set an
octet of 0? E.g. 192.168.0.147? When I get to the 3rd octet and turn the
multi knob all the way to the left or right, the lowest number is 001
and the highest is 255. What gives? Latest firmware, latest boot loader.

Any advice would be fantastic!

Thanks!

Jeff - W4GPL
Brand new Omni VII owner...


<Prev in Thread] Current Thread [Next in Thread>