Re: [TenTec] Corsair II PTO Problems

[Bob Towers <mm0rkt@beeb.net>]

I had warble problems on my Corsair II.

I got the rebuild kit from TenTec and did it in about 2 hours. The 
grease in it was all hardened and black, so it certainly needed it. It 
didn't cure the warble, so I did it again a number of times. I could do 
a clean-up and re-grease in just over an hour.
It turned out it wasn't the PTO which was causing the problem. The 
warble was only on certain bands and eventually - with some help from a 
K5 - I traced it to a dirty track on the band offset pot. A squirt of 
switch cleaner did the trick.
73

Bob Towers
MM0RKT