I swapped the same filter into my Corsair years ago. It made a very
noticeable improvement in skirt selectivity on both SSB and CW. Highly
recommended!
73,
Bob WB2VUF
Mike Hyder -N4NT- wrote:
It'll be fine without realignment. Ten-Tec still works on the Argosy. The
220 filter was the very best thing I did for my Argosy. It helped CW even
more than the 500 Hz filter, so you done good.
73, Mike N4NT
----- Original Message -----
From: "John, W3ULS" <w3uls@3n.net>
To: <tentec@contesting.com>
Sent: Wednesday, February 21, 2007 6:49 PM
Subject: [TenTec] Argosy 525 Query
I've added the #220 SSB filter in the Argosy 525. The manual says to
realign the carrier oscillator.
What adverse effects will occur if the oscillator is NOT realigned?
(Probably would require a trip to Ten-Tec--if they still work on
Argosies.)
73,
John, W3ULS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|