If you have at least one PCI slot available, I strongly recommend the MOXA
multi-port serial cards. There is a 4 port and an 8 port available at
reasonable cost, and they are also usually available used on the auction
sites. They work great on all versions of Windows (i'm now using one with
MS Vista) as well as Linux (Fedora Core 4). Just a thought.
Dave K5WNV
----- Original Message -----
From: "Rick Williams" <rick.williams@telus.net>
To: "TenTec List" <TenTec@contesting.com>
Sent: Saturday, February 03, 2007 11:46 AM
Subject: [TenTec] USB Serial Converters
> Well I'm about to upgrade to a new computer. It seems that these days not
> only are serial ports scarce - so are PCI slots. At the moment I'm
> controlling my Orion, Argo V and digital PTT with serial ports. In
> addition, I'm operating a lot of other gear with a 4th port through a
> 4-position switch (LP-100, Icom HT software and my Palm).
>
> I've been looking at a 4-port USB to DB-9 serial adapter by USBGear.
>
> http://www.usbgear.com/usb-four-port-serial-adapter-rs-232.cfm
>
> .. and the SerialGear:
>
> http://www.serialgear.com/4-Port-Serial-USB.html
>
> No doubt there are others out there.
>
> Does anyone have any experience with these 2 products or a RECOMMENDATION
> on
> another USB to RS-232 box.
>
> Thanks.
>
> 73,
>
> Rick
> VE7TK
>
> Website: http://www3.telus.net/ve7tk
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|