TenTec
[Top] [All Lists]

Re: [TenTec] I need help in repairing my Argosy II

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] I need help in repairing my Argosy II
From: Giorgio Santantonio <iz0dio@yahoo.it>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 22 Sep 2006 17:07:29 +0200 (CEST)
List-post: <mailto:tentec@contesting.com>
Hi Ed and thank you for your reply.
   
  1) I did it and I'm waiting for a reply (You was faster)
  2) Yes, I there is any apparent mechanical friction
  3) If I try tu tune on same specific VFO position (2 turn and half, for 
instance), tuning is very difficult. In other position I don't have any problem 
and the VFO work perfectly
  4) The problem occur in Receive and Transmit mode and there isn't any thermal 
drift. It isn't a drift but a series of frequency jumping abt. 1 KHz wide
  5) The problem occurr in all the band at the same VFO positions, that's why 
I'm convinced is a PTO problem
   
  Thank you in advance and sorry for my poor English (I'm Italian)
  Giorgio

Ed - K9EW <k9ew57@gmail.com> ha scritto: 
  Hi Giorgio,

I have a couple of questions...

1) Have you called TenTec? They may be able to give you a very short
list of things to check.

2) Does your PTO tune smoothly?

3) When you tune in a signal, can you go directly to the frequency
you want, or do you have to rock the PTO back and forth to tune in the
signal?

4) If you stay in the Receive mode and don't transmit, does the
frequency jump occur? If it does, does it happen within a few minutes
of turn-on, or is it after the rig has "warmed up"?

5) Does this problem occur on all bands, or just one or two?

This may help narrow down the possible sources, and I'd highly
recommend a call to TenTec.

73,
ed - k9ew

On 9/21/06, Giorgio Santantonio wrote:
> My Argosy II is suffering of a VFO problem: on same specific VFO position the 
> frequency jump around about 1 KHz and the tuning is impossible or can be done 
> with high difficulties. I suspect this is due to the VFO (probably it have to 
> be cleaned). Someone experienced a similar problem and can gime me an help?
> Thank you in advance
> Giorgio Santantonio
>
>
> __________________________________________________
> Do You Yahoo!?
> Poco spazio e tanto spam? Yahoo! Mail ti protegge dallo spam e ti da tanto 
> spazio gratuito per i tuoi file e i messaggi
> http://mail.yahoo.it
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


 __________________________________________________
Do You Yahoo!?
Poco spazio e tanto spam? Yahoo! Mail ti protegge dallo spam e ti da tanto 
spazio gratuito per i tuoi file e i messaggi 
http://mail.yahoo.it 
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>