Ken,
How much current is being drawn when the power supply kicks off? It
should kick off when you exceed 20 amps. If this is what is happening
then maybe the impedance of the antenna is too low. If your swr is
over 2:1 and the impedance is less than 25 ohms you may see too much
current being drawn by the PS and it will kick off.
At 09:00 PM 2/20/2006, you wrote:
I am a new owner of a Omni D and when turn up the drive, it kicks the P/S
off, all help would be appricated
Ken N4ALP P/s the Ps is a 252 m
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|