Hi,
I have an Argo 509 with a strange problem. Sometimes when I turn the rig
on, or after I transmit, the receiver becomes very quiet. You can not hear
atmospheric noise and signals that were in the s6 or so range no longer
move the meter.
It goes as randomly as it comes. Sometimes it comes back on its own,
sometimes I have to turn it off and on again a few times, sometimes,
but not always I have to transmit to clear it. Otherwise the rig works
fine except for the previously mentioned dial cord problem.
I've checked the obvious such as power supply problems, dirty switches and
fuses, intermitent cables, and loose internal connections.
It's almost as if the T/R relay is dirty, but it doesn't have one.
Any suggestions would be welcome.
Thanks and 73,
Geoff.
--
Geoffrey S. Mendelson, Jerusalem, Israel gsm@mendelson.com N3OWJ/4X1GM
IL Voice: (07)-7424-1667 IL Fax: 972-2-648-1443 U.S. Voice: 1-215-821-1838
The trouble with being a futurist is that when people get around to believing
you, it's too late. We lost. Google 2,000,000:Hams 0.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|