I had been trying to get a group together to order
1000 Hz filters for the 9.0 MHz IF in the OmniVI, etc.
rigs. As it turns out, there is now a reflector for
INRAD filters and a post to it brought forth the following
reply from W2VJN:
> >
> > From: "George Cutsogeorge" <w2vjn@rosenet.net>
> > Date: 2005/02/14 Mon PM 05:31:20 GMT
> > To: <list@inrad.net>
> > Subject: [INRAD] New Ten Tec style filters
> >
> > Allan and the list,
> >
> > We have had enough requests for the following filters to add them to our
> > inventory.
> >
> > #765 600 Hz bandwidth, center frequency 9000.5 kHz, 4 poles, price=$80
> > #766 1000Hz bandwidth, center frequency = 9000.75 kHz, 8 poles, price=$115
> >
> > The usual discounts will apply.
> >
> > The 765 can be used as a roofing filter in the Omni VI for receiving with a
> > 500 Hz pitch. It is also useful for use in the 9 MHz IF of many Ten Tec
> > radios when mounted on a plug in board.
> >
> > The 766 is designed for the main IF in the Omni and other radios for wide
> > CW
> > listening.
> >
> > Delivery will be about 6 weeks from now.
> >
> > George, W2VJN
> >
> >
> >
> > _______________________________________________
> > INRAD mailing list provided as a service by International Radio
> > INRAD Web Site: http://www.qth.com/inrad
> >
> > To Submit Message to the List: list@inrad.net
> > List Help:
> > http://mail.inrad.net/mailman/listinfo/list_inrad.net
> >
Needless to say, I will be ordering the 766 filter for my
rigs.
Now to get a matching filter in the bandpass IF...
K7GT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|