Well, that's certainly interesting. And thanks (to everyone) for the info.
It always seemed like either (1) the amp would for some reason stop
responding with TxEN or (2) the Orion was either missing the handshake or
getting thoroughly cumboozled and ignoring it -- thus wouldn't go into
transmit. Sounds like the latter, but it's curious that enabling the 2nd
loop (even without anything connected apparently) may solve the problem.
If that is a solution, hopefully it will lead T-T down the path to diagnose
and fix whatever conditions are cause things to misbehave in the first
place.
Curiouser and curiouser .. :-)
Grant/NQ5T
> Grant and all: Not sure that I am the originator but my
> suggestion back channel to Tommy was that I had a similar amp
> keying problem and found that both keying loops had to be set
> the same for anything to work properly.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|