Re: [TenTec] Argonaut V

["jack" <jfriend31@comcast.net>]

one does not need lots of stuff to run digital modes with MixW ...just an 
isolation transformer (obtained for a few bucks from Radio Shack with a 50K 
pot for gain control in series) in the lines from audio in and mike in from 
sound card to rig (non-ORION)

for CW one can build a simple switch as shown in the help files of MixW for 
keying one's rig

with the Orion cable from rig to sound card NO other connections need be 
made to work all but CW as noted above

jack ak7o

PS: i have a very little used RIGblaster with Icom mike cable i would be 
happy to sell for $50 shipping included

sold the IC756



----- Original Message ----- 
From: "ron" <roncasa@verizon.net>
To: <tentec@contesting.com>
Sent: Saturday, December 11, 2004 8:35 AM
Subject: RE: [TenTec] Argonaut V


> Hey thanks everyone who responded on my question about using Rigblaster.
>
> The suggestion to go with MIXW is a good one!
>
> I am now in the trial period.
> It has some really cool stuff and most important of all, it controls the
> Argonaut V in the digital modes!
>
> Ron
> Wb1hga
> Because it's a Ten Tec!
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec