Re: [TenTec] Corsair II question on filters

[Clark Savage Turner <csturner@kcbx.net>]

On Saturday, March 27, 2004, at 06:30 PM, Jim Larsen - AL7FS wrote:
> Which filters must stay with the radio?  I would say for sure the 285 
> and 282 can go.  The 220 filter, I am not sure.  Is it needed for SSB 
> or just the unidentified filter?  The unidentifiable filter, I am not 
> sure.  My goal is to identify what filters make up a stock radio.
Not sure this part was answered.  The 220 must stay (on the little board 
in the back.  The SSB filter on the left in position 1 must stay.  You 
won't have a stock radio without these two 2.4 kHz filters in place.  
The stock radio came with the pair.
Clark
WA3JPG