EXCELLENT suggestion. This worked. From behind my firewall eyeball works!
I now have streaming audio on my LAN. Thanks Jeff. Now I can play with my
setup. Eyeball and realvnc work and work fairly well
Mike Donovan VE7EPQ
----- Original Message -----
From: "Jeff Kelly" <jkelly@bellatlantic.net>
To: <tentec@contesting.com>
Sent: Friday, January 02, 2004 5:35 PM
Subject: Re: [TenTec] Remotely controlling my Jupiter
> http://www.eyeball.com/
>
> I haven't used this for ham radio but many folks
> use Eyeball as a replacement for Netmeeting when they
> use a router or firewall.
>
> Jeff
>
> ----- Original Message -----
> From: "Mike Donovan (Donovan Photos)" <mdonovan@ocol.com>
> To: <tentec@contesting.com>
> Sent: Friday, January 02, 2004 9:16 AM
> Subject: Re: [TenTec] Remotely controlling my Jupiter
>
>
> > Actually, I have the server/client working great. It is the audio that
is
> > the problem. I am using XP home behind a firewall, and I have not been
> able
> > to get MS Netmeeting to work for audio or video behind my firewall.
DLink
> > (the brand) has suggestions but they see Net Meeting as the source of
the
> > problem. Microsoft has a bunch of solutions but they also have problems
> > with Netmeeting behind a firewall...so with Netmeeting I am stuck.
> > Apparently some people are succeeding with XP Pro. Not sure what the
> > difference is, but that may be something I have to consider.
> >
> > Mike Donovan VE7EPQ
> > ----- Original Message -----
> > From: "David W LeJeune" <lejeuned@centurytel.net>
> > To: <tentec@contesting.com>
> > Sent: Friday, January 02, 2004 2:23 AM
> > Subject: RE: [TenTec] Remotely controlling my Jupiter
> >
> >
> > > I use Microsoft's Net Meeting (assuming you're using windows). Works
> OK,
> > > but setting the mic gain and volume control on both sides is a bear.
> > Finally
> > > had to bring the laptop into the shack and adjust side by side. After
> > that
> > > seems to work pretty good. I have a control program that sorta like
the
> > > TenTec supplied software interfaces that works client/server like,
with
> a
> > > TCP connection between the remote and the contol computer. If you'd
> like
> > > I'll send you a copy to try.
> > >
> > > Dave K5WNV
> > >
> > > -----Original Message-----
> > > From: tentec-bounces@contesting.com
> > > [mailto:tentec-bounces@contesting.com]On Behalf Of Mike Donovan
(Donovan
> > > Photos)
> > > Sent: Thursday, January 01, 2004 2:17 PM
> > > To: TenTec@contesting.com
> > > Subject: [TenTec] Remotely controlling my Jupiter
> > >
> > >
> > > I am running my Jupiter using Carl's programme, N4PY. I can remotely
> > > control the radio via realvnc on my network, but I am unable to get
> > remote
> > > audio working so that I can hear the radio....so that limits me to
> digital
> > > modes only. I have tried to get AUDIOLINK working but to no avail.
Is
> > > there any really good program that will allow me to run audio over my
> > > inhouse lan so I can use my TenTec radio anywhere in the house.?
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > >
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|