I use Microsoft's Net Meeting (assuming you're using windows). Works OK,
but setting the mic gain and volume control on both sides is a bear. Finally
had to bring the laptop into the shack and adjust side by side. After that
seems to work pretty good. I have a control program that sorta like the
TenTec supplied software interfaces that works client/server like, with a
TCP connection between the remote and the contol computer. If you'd like
I'll send you a copy to try.
Dave K5WNV
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Mike Donovan (Donovan
Photos)
Sent: Thursday, January 01, 2004 2:17 PM
To: TenTec@contesting.com
Subject: [TenTec] Remotely controlling my Jupiter
I am running my Jupiter using Carl's programme, N4PY. I can remotely
control the radio via realvnc on my network, but I am unable to get remote
audio working so that I can hear the radio....so that limits me to digital
modes only. I have tried to get AUDIOLINK working but to no avail. Is
there any really good program that will allow me to run audio over my
inhouse lan so I can use my TenTec radio anywhere in the house.?
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|