Ernie,
Are you trying to flash the firmware using the same computer / COM port /
cable that you use to control the radio during normal operation? If so,
does everything work when running the control program? Particularly, does
the SMeter move following received signal strength and does the remote
tuning knob work? Most of the other functions (setting frequency from the
keyboard or mouse, setting other radio parameters) will work fine if the
data is getting from the computer to the radio, but no data is getting back
to the computer from the radio. If the SMeter and remote tuning knob working
would indicate that data is getting back to the computer from the radio.
Have you confirmed that the port in the flash program is set correctly? What
OS are you using?
As for the tuner, remember that the MFJ meter is between the tuner (the
VersaTuner) and the radio and thus measures the tuned SWR. With the PT11,
the external meter is measuring the SWR between the tuner (the PT11) and the
antenna. How are using the ALC light in this measurement? I have found
that the mic gain setting that makes the LED come on decreases as I cut back
on the RF power. For example, it may take half scale to get the LED on at
100 w, but only a quarter scale to get the LED to come on at say 25 watts.
73,
Mark
----- Original Message -----
From: "Ernest Mills" <emills@nycap.rr.com>
To: <tentec@contesting.com>
Sent: Saturday, July 27, 2002 14:34 PM
Subject: [TenTec] Pegasus
> Hi Ya'll,
> I need help on a couple of things with the Pegasus. Cant find email
tech help on tt site.
>
> First off, I want to FLASH the firmware to 1.19 as mine is still at
1.17b1 Prob;em is I follow the eight step procedure in the help file. ie
turn off xcvr, connect pc, turn on xcvr, start update program (new download
from tt), select COM port (2 in my case) click UPDATE, selected the
550V1190.RUF file (loader is ver 1.026) and get an error message
"...communication with Radio failed ...."
> I rebooted the computer, switched the rig off/on again and still get
this message. Anybody got any ideas fer me? :)
>
> Secondly, I have used the PT-11 internal tuner since last November but
not on 80 meters. When I try and do an auto tune on 80, although it seems
to go through it's thing, when I transmit the ALC led comes on at about 10w
Forward, 4 watts rev, as measured on the CN-801 power/SWR meter. If I use
the MFJ Versa tuner using the meter on it, I can tune normally and run the
rig with about 50w with 1.5 reflected. Again any ideas would be really
appreciated.
>
> Ernie WM2U
>
>
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|