TenTec
[Top] [All Lists]

[TenTec] Ten-Tec used/demo list 18 June 02

To: <tentec@contesting.com>
Subject: [TenTec] Ten-Tec used/demo list 18 June 02
From: winjones@ix.netcom.com (Winston F. Jones)
Date: Tue, 18 Jun 2002 20:41:01 -0400
I think it's odd that the Argonaut II is selling for more than the Delta II,
especially since the Delta II is an Argonaut II plus the added feature of a
100 watt amplifier!!!
73, Winston  K4CWQ

----- Original Message -----
From: "Ron Notarius WN3VAW" <wn3vaw@fyi.net>
To: <tentec@contesting.com>
Sent: Tuesday, June 18, 2002 16:30 PM
Subject: Re: [TenTec] Ten-Tec used/demo list 18 June 02


> Interesting that the used Argonaut II is selling for $100 more than a used
> Corsair II.
>
> That saying something... just not sure what!  (and I sure wish I had the
$$
> for that Corsair, too!)
>
> 73, ron wn3vaw
>
> "And they give you cash,
> which is just as good as money!"
> Yogi Berra, AFLAC Commercial, 2002
>
> ----- Original Message -----
> From: Ten-Tec Inc. Amateur Radio Sales <sales@tentec.com>
> To: <tentec@contesting.com>; <sales@tentec.com>
> Sent: Tuesday, June 18, 2002 2:14 PM
> Subject: [TenTec] Ten-Tec used/demo list 18 June 02
>
>
> Current as of June 18, 2002
>
> The following equipment is available as used equipment direct
> from Ten-Tec. 30 day warranty, 10 day trial period, shipping
> is additional. Exception: used linears warrantied 30 days
> except for final tubes which carry no warranty. Used items
> often sell quickly. Please make sure we have the item in stock
> before sending payment.
>
> Transceivers:
> 535 Argonaut II $750
> 536 Delta II $695
> 550 Pegasus $750
> 561 Corsair II $695
> 562 Omni-V $1095
> 586 Paragon II $1150
>
> Other items:
>
> 254 200 watt antenna tuner $140
> 422 Centurion linear amplifier $1475
> 700 'old style' hand mic, 4 pin conn $17.50
> 803 40m Scout band module $25
> 804 30m " $25
> 806 17m " $25
> 807 15m " $25
> 809 10m " $25
> 936 20 amp PS matches Delta II, Argonaut II $100
>
> The following equipment is available as demo gear and
> carries a 1 year parts and labor warranty, 30 day trial
> period. Warranty exception: the 416 Titan II carries a
> three year parts and labor warranty.
> What is a 'demo unit'? Demos are units that have
> been evaluated in one of the following manners: at the
> factory or hamfests for display purposes, loaned out for
> evaluation by commercial customers, or returns on our
> 30 day risk-free sales policy. Shipping is additional.
>
> RX-350 shortwave receiver $1079.10
> 302 remote encoder/keypad for Pegasus $125.10
> 302J remote encoder/keypad for Jupiter $125.10
> 302R remote encoder/keypad for RX-350 $125.10
> 526 6N2 VHF all mode xcvr $660.25
> 538 Jupiter $1070.10
> 538AT Jupiter with internal auto antenna tuner $1339.20
> 550 Pegasus $798.50
> 564 Omni-VI Plus $2326.50 - this is definitely going to be
> the very last Omni-VI Plus sold with a 1 year warranty.
> Final production run serial number.
> 701 hand mic $26.60
> 705 desk mic $94.95
> 803 40m Scout band module $35.10
> 804 30m " $35.10
> 805 20m " $35.10
> 807 15m " $35.10
> 937 11 amp PS for 526 or Scout $84.55
> 963 25 amp switching PS $160.55
> 1209A 2-to-6 meter transverter $151.05
>
> Stan Brock, WDØBGS
> Amateur Radio Sales
>
>
>
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
>    Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
>    Repair (865) 428-0364 8-4.  Sales (800) 833-7373 9 am-5:30 pm.
>    Fax (865) 428-4483 24 hrs.  Visit us at <http://www.tentec.com>
>
>    --->--->---> Please note: E-mail <sales@tentec.com> for sales
>    and general product info only.  We presently do not offer
>    repair, parts, or kit building tech support by electronic mail,
>    please telephone (865) 428-0364 or (865) 453-7172.
>
>    Ten-Tec manufactures amateur radio equipment, military and com-
>    mercial use HF radio equipment, custom aluminum and steel
>    enclosures and has an on-premises, fully equipped tool and die
>    facility supplying metal and plastic injection mold industries.
>    Potential tool and die, custom enclosure or communications
>    electronics customer?  Contact us with your needs.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>