Has anyone else been looking at the Pegasus programming manual?
There seem to be a few typo's which is certainly to be expected. Guessing
for the right answers
I have the command string for the FISTS frequency on 20 as
"N5C460AAA62A4"+vbCr with a Bandwidth of 1050 and a Cbfo of 525 for 14.058
mHz
My assumptions on the correct formulas could certainly be wrong, has anyone
put an RS-232 PIC on their cable between the Pegasus and their computer and
been watching the data streams going by? A Pic is a three wire with a
switch connector from Pins 2 and 3 of the RS-232 cable on one Com port wired
over to the other Com port so you can watch with a different program what is
going up and down the cable to the Pegasus.
Lots of good things are possible with the way they have chosen to set-up
this radio, this is going to be another fun radio for a lot of us....
Larry
VA3LK
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|