Disconnecting plug 52 did not reduce the speaker/headphone click
when I performed this mod 3 weeks ago. I agree that it is ANNOYING
and NOT in keeping w/ the performance I expect from a Ten Tec,
a rig known for it's cw prowess.
Good luck and let's hope someone has the answer for this one...
73 John K7FD
-----Original Message-----
From: Paul Christensen <paulc@mediaone.net>
To: Ten Tec <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Sunday, November 22, 1998 7:27 AM
Subject: Re: [TenTec] Ten Tec Cure for Clicking Omni 6 a No Go
>
>Dale,
>
>Have you tried disconnecting plug 52 on the IF/AF Circuit Board? My Omni
>had the same problem and after bypassing the sidetone "wraparound" circuit,
>the problem went away completely.
>
>If you haven't tried it, simply unplug connector 52. If it works for you,
>use a tie-wrap and fasten it next to an adjacent cable bundle. The
sidetone
>circuit still works without it, only now the volume control controls it but
>the sidetone mix is still adjustable using your "ST" button. They should
>have designed it like this from the beginning.
>
>-Paul, W9AC
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|