How is the RF setting or the SQUELCH settings? You might have SQUELCH set so
high the SSB doesn't come through.... Similarly, you may have had the RF set
down to a low level - that was good enough for FM - but not enough for weak
signals on SSB and CW.
Randy
--- On Mon, 8/18/08, Jason <j_da_fox@yahoo.com> wrote:
From: Jason <j_da_fox@yahoo.com>
Subject: [Yaesu] (no subject)
To: yaesu@contesting.com
Date: Monday, August 18, 2008, 12:05 PM
Hi all. I have a Ft726R that is acting funny. It has 2m, 440, and the 10m module
in it. The radio works fine on FM, but will not transmit on ssb or cw on any
band. It also has little receive audio on ssb and cw. If you turn up the volume
all the way, you can faintly hear a signal. Any ideas? Thanks
Jason
KC0KWL
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|