Yaesu
[Top] [All Lists]

Re: [Yaesu] Yaesu Digest, Vol 43, Issue 18

To: <yaesu@contesting.com>
Subject: Re: [Yaesu] Yaesu Digest, Vol 43, Issue 18
From: "Dave Maley" <dgmaley@inav.net>
Reply-to: Dave Maley <dgmaley@inav.net>
Date: Sat, 29 Jul 2006 14:23:57 -0500
List-post: <mailto:yaesu@contesting.com>
John;
You are going to have to better define this problem.
1. The 1000D has two receivers, do both show the same problem?
2. Do you have the second receiver front-end?  Do you have the problem 
through it?
3. Have you tried selecting different filter combinations or modes?

Otherwise, a lot of switching is done on the lo-pass filter board. Try 
cleaning and
reseating all the connectors on it es gud luck de wa0zzg
Let us know how you come out.

----- Original Message ----- 
From: <yaesu-request@contesting.com>
To: <yaesu@contesting.com>
Sent: Saturday, July 29, 2006 11:00 AM
Subject: Yaesu Digest, Vol 43, Issue 18


> Send Yaesu mailing list submissions to
> yaesu@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/yaesu
> or, via email, send a message with subject or body 'help' to
> yaesu-request@contesting.com
>
> You can reach the person managing the list at
> yaesu-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Yaesu digest..."
>
>
> Today's Topics:
>
>   1. FT1000 D Problem (John Muzyka)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 29 Jul 2006 08:56:49 +0100 (BST)
> From: John Muzyka <g4rcg@yahoo.co.uk>
> Subject: [Yaesu] FT1000 D Problem
> To: yaesu@contesting.com
> Message-ID: <20060729075649.52749.qmail@web26306.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hi All
>  I have an FT1000D and it has developed an irritaing fault, I tend to have 
> the radio switched on and I listen to the bands when I am working on the 
> computer, for no reason the RX starts to go quiet, if I blip the mic the 
> RX comes back to normal, leave it again and about 4 or 5 mins later it 
> will do it again, just blip the mic and it goes back to normal. When 
> operating I dont get it as the rig is going between TX/RX its only when I 
> go listening for long periods
>  Anyone had this before or can point me in the right direction
>  Cheers
>  John G4RCG
>
>
> ---------------------------------
> All New Yahoo! Mail ? Tired of Vi@gr@! come-ons? Let our SpamGuard protect 
> you.
>
> ------------------------------
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
> End of Yaesu Digest, Vol 43, Issue 18
> ************************************* 

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>