Does someone have the MFR Menu codes? The DUAL button is set to only turn the
SUB REC VFO on while the DUAL button is pressed. When DUAL is released the MAIN
REC VFO comes back on and the SUB REC VFO off. To find the offset station
working SPLIT requires holding DUAL pressed to listen for the station working
now, when DUAL released the MAIN REC VFO comes back on.
I prefer the usual setting, DUAL turns on both REC VFO, but I think it is a MFR
software setting not in the manual.
SPLIT (XMIT VFO) works as expected. Only the setting for the REC VFOs is
strange. It is not possible to turn both REC VFO on at the same time. Pressing
the SUB REC VFO LED switch turns off the MAIN REC VFO while the SUB REC VFO is
on.
73 John K1ER
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|