Bob,
There is nothing weird about this. Any antenna mounted 2 inches from a large
metal area for most of its effective 1/4 wave length is going to have
undesireable coupling/swr effects.
73
Steve wd0ct
----- Original Message -----
From: "KZ2G" <kz2g@optonline.net>
To: "YAESU LIST" <YAESU@contesting.com>
Sent: Sunday, November 04, 2001 6:51 AM
Subject: [Yaesu] swaying swr on 10 meters with whip on van
> Ok, gang. Here's a weird one!
>
> i have not tried adding coax yet. but check this out:
>
> i think the 10-meter hamstick whip might be interacting with the van's
> walls. the whip is mounted on the rear bumper and just 2" away from the
> van's rear wall and van body. i noticed i can load the whip with the
tuner
> under 1.5:1...but when we drive around, the swr varies very greatly. i
> think this is the whip swaying farther and closer to the van. i checked
the
> connections. none loose. the bumper mount is tight too. so i think the
> swr sways as the antenna does. i even banged the FT-100D while
transmitting
> while i was parkd and not moving, thinking something inside the rig was
> loose. no change in swr. it stayed at under 1.5:1. i even reved the
engine
> while stationary. no change in swr. the swr only sways high and low as i
> drive, and van moves. i have not noticed this on ssb or other bands.
only
> on 10-meter FM. any suggestions?
>
>
> Bob, KZ2G
> ----------------------------
> Omni 6 Plus & FT-100D, C U on CW!
> See my Ham web at www.geocities.com/ram9872002/kz2g.htm
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
|