Eric,
I called yaesu and they confirmed that the FT-920
has a problem on ssb with the proper output pwr. They
are offering a service modification to fix it. Forget
the radio cops, I knew what I was getting was not
right. I thought I could get some help from this
reflector, but it seems like this is a forum for many
to use as a cerebral septic tank.
Mike KK4MS
--- KA2YKC@aol.com wrote:
> In a message dated 1/10/00 9:06:45 AM Eastern
> Standard Time, a_borg@yahoo.com
> writes:
>
> <<
> To All 920 er's,
>
> Does anyone know the correct driver pot to
> increase
> the output drive to the final amps ? I'm mainly
> interested in increasing the average mic drive
> output.
>
> Mike KK4MS >>
>
> On CW mode, I increased the output to about 110w.
> Mine was less than 95w out
> of the box. HOWEVER, I was still dissapointed to
> find that the average voice
> output was still way down as compared to other HF
> rigs I own. It will peak at
> 100w or so on a whistle or steady tone, but on voice
> it averages around 25w
> or so.
>
> Radio cops note:
> I am quite aware of the difference between RMS and
> PEP readings, but it is
> well known that some of the newer radios are not
> delivering as strong of an
> SSB output as compared to, let's say, a Kenwood
> TS450S.
>
> 73 Eric
> KK2ED
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|