Thanks for the information chaps .
It would appear from their Web site that they don't actually do anything
for the FT1000D as was mentioned , but I have emailed them to check in
case it is still available. I will post an email if it is.
In article <35FA5D33.EE17C54B@isla.net>, Angel <kp4te@isla.net> writes
>Dick , Robin
>I have that tuning mod installed on my FT1000D and it really works. As
>it comes from the factory, the tuning rate of the rig is quite fast,
>specially if you do a lot of cw with narrow filters on. I installed it
>about a month of having the radio ( is about 4 or 5 years old) and have
>not had any problems with it. I installed the 2 options, for both
>tuners.
>The only rare thing that my radio does is that when I turn it on and try
>to move the main tune knob it will only tune to the 1st decimal the
>second will not move, but by moving a little bit the secondary tuner
>knob, it clears and operation is normal. Both tuning knobs change the
>rate of tuning depending how fast you move each one. Really is a clever
>an nice option to install. Installation is easy.
>Angel KP4TE
>
>International Radio's web site can be found at http://www.qth.com/inrad
>although I don't think they have anything for the FT-1000D.
>
--
Robin Thompson
G3TKF
City of Bath
U.K.
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|